Re: Add first host
Thanks for helping out. @storperf I installed openssh-server but are unable to connect to console with putty of sftp. How can copy these files? @chienchia yes, just tried to confirm, I can ping esx...
View ArticleRe: Add first host
Assuming you're using ESXi 4.0+, as long as you can ping ESX from controller VM, the only case that you may get the this error is a wrong credential was given and the session was interrupted. Please...
View ArticleRe: Add first host
Restarting Tomcat did not solve the issue. And yes, still able to ping. When I mistype the password I get 'authentication failed' so I don't think the password is the problem.I'm using esxi 5.0.I can't...
View ArticleRe: Add first host
If you're able to SCP to ESX, please SCP the log to ESX first and then retrieve those files from ESX. If you're able to authenticate (either successful or failed), VI SDK should be working. If you have...
View ArticleRe: Add first host
No I can't SCP.Restarting Tomcat results in a unresponsive server.The servers seems to be 'unstable' and I need to rebootShould it be possible to ping the server? I don't get a reply, but the is no UFW...
View ArticleRe: Add first host
Hi, This sounds most likely there are networking configuration issues in your environment. However, I’d like to confirm that VI SDK is working okay on the controller VM. Could you please send an email...
View ArticleRe: Add first host
Done!What I was wondering: could it be the problem that we use esx5i hosts?Other things I did was disable the lockdown mode and enable SSH, are there more requirements? I can't find any?
View ArticleRe: Add first host
ESXi5 is supported and tested. You do need SSH enabled on ESX host in order to debug easier but I don’t think it is required for IOAnalyzer to work. Thanks,Chien-Chia
View ArticleIO Analyzer vs IO Meter
Hi, I've download IO Analyzer from: http://labs.vmware.com/flings/io-analyzer and followed the instructions. My config is as follows: IO Analyzer on a single VM IO Meter test - 4 disks, 10K RPM RAID...
View ArticleRe: IO Analyzer vs IO Meter
Hi, You can run Iometer directly fron console. You need to login console (through VI client) and follow the example in tutorial. ($/usr/bin/dynamo & and $wine /usr/bin/Iometer.exe). Can you run the...
View ArticleRe: Add first host
This issue is driving me mad.I've deployed the machine again with the OVF template, left everything default but cannot connect with the machine with SSH/Putty or SCP.When I install a new minimal ubuntu...
View ArticleRe: Add first host
Hi, I am sorry to hear that you are still suffering from networking problem. Our backend code was written based on the following assumption.- Each worker VM can scp files from/to controller VM (even if...
View ArticleRe: Add first host
Thanks everyone for helping out, it's working!!What I did: - removed all previous installs- downloaded new install for IO analyzer- deployed ovf as described in pdf- left everything default (dhcp)-...
View ArticleClik here to view.
Re: Add first host
My guess is some of the networking configuration was messed up somehow. Though I’m glad it works for you now Thanks,Chien-Chia
View ArticleClik here to view.
Statistics for vmhba
Hello, I am running i/o analyzer for my vm's and I have the following setup vmhba34---10 SCSI disk attached iSCSI Software Adapter -- 3 iSCSI disk attachedvmhba2 -- Local LSI disk attached I have disks...
View ArticleRe: I/O Analyzer 1.5 - Tests Not Running
Could you please send /var/www/ioa.log and /var/log/daemon.log to io-analyzer-info@vmware.com<mailto:io-analyzer-info@vmware.com>? We will also provide a few debugging steps in private to collect...
View ArticleRe: I/O Analyzer 1.5 - Tests Not Running
Sehr geehrte Damen und Herren, Ich bin am 30.11.2012 wieder im Haus.
View ArticleRe: Statistics for vmhba
Hi, If you run IOmeter via IOAnalzyer web UI, by default it pushes IO to /dev/sdb. If you want it to access other virtual disks, please power off VM, delete the second virtual disk (100MB one) that...
View ArticleRe: Statistics for vmhba
Thanks for your response and now I see I/O groing thru the device using the ICF file which I created on the io analyzer VM. Now, here is my setup I have 32 VM's windows and have a virtual disk (Raw...
View Article