Hi,
If you run IOmeter via IOAnalzyer web UI, by default it pushes IO to /dev/sdb. If you want it to access other virtual disks, please power off VM, delete the second virtual disk (100MB one) that comes with IOAnalyzer, and then add your new target virtual disk properly.
During the stat collection, all inactive vmhbas will be filtered out, so if the vmhba has no IOPS, it won't be shown in the result. If you would like to see all vmhbas, you may manually change the filter threshold as follows:
http://IO_ANALYZER_IP:8180/IOAnalyzer/ioanalyzer/script?command=set-adapter-threshold&value=0.0
(The default filter threshold is 0.1 IOPS.)
Thanks,
Chien-Chia